Patriot Hitches Square Trailer Jack w/ Reinforced Mount - Drop Leg - Sidewind - 28" Lift - 7K

Video Transcript for Review of Patriot Hitches Trailer Jack - Square Trailer Jack - PH66NR

Hi, everyone. Steve here with etrailer.com. Today we're looking at our Patriot Hitches square trailer jack with a reinforced mount and a nice drop leg. It's considered a sidewind mount on the handle, and it has 28 inches of total lift. Now folks, I just kind of caught this loosely mocked up as far as the handle here, and that kind of stuff, for demo purposes only. So bear with me as we go through this jack together.

So whenever it's fully installed, as far as heights and those kind of things, my buddy Jeff here took som photos for me with this fully retracted on the left, and then there on the right, fully extended. Fully retracted on the left, it's 24 and three quarter inches tall, fully extended on the right, 40 and one eighth inches tall. So pretty impressive amount of lift. And again, that drop leg can travel 13 inches as well. So you would simply pull the pin as far as the drop leg would go, you got a pin over here as well that holds the actual pin in place.

And then as you know, if you take that out, (metal clanking) bear with me here, (metal clanking) then this drop leg can come all the way out or in as needed. So that's a comparison in height just by itself for that drop leg. So pretty impressive amount of travel. I'm gonna go ahead and leave that pin out for now. So same thing on the mount itself.

You got the two brackets here that would marry up, depending on where you need to mount it out on your frame. Same thing, you got a couple pins here. You could pull both those pins out, and that would detach the jack itself from the bracket. So this is gonna be built for trailers that are maybe construction equipment, ag machinery, other heavy cargo, and it's really innovative heavy duty bracket here. It's gonna give you that excellent support for that side mount jack.

And the bracket also makes it easy to remove the jack and mount it out of the way for travel. So again, you're just simply pulling these two pins off, (metal clanking) and then very carefully, obviously, this would be bolted to the trailer, that bracket, or the jack rather, would come out of the bracket, and then you would simply mount it back up on the bracket when you need to. I'll leave that outta the way as well. So now you got a good look at the jack just in its bare form, if you will. Again, the drop leg pairs with the already substantial travel in the jack itself to get that trailer raised for high load. So again, most likely construction equipment or ag machinery, but feel free to use it on something shorter if you so choose. The support capacity is 8,000 pounds, while the lift capacity is 7,000 pounds. Again, it's a sidewind, so very simple to crank up or down. You've got built-in greaser right up here and that's gonna be for your maintenance. Always make sure you're lubricating the jack every so often just to make sure everything's good up in here with the gears and everything. Keep it lasting for a long time. Well folks, I think that's gonna wrap it up for our quick look together at this Patriot Hitches square trailer jack with the reinforced mount drop leg. And again, it's a sidewind option. I'm Steven, thanks for watching.